|
|
Original Post By:
Marianna
|
Date: 7/30/2019 3:50:43 PM
(Updated: 7/30/2019 3:51:35 PM)
|
Hi! I read Y'all's post on this. I will be receiving mine in several days. It will need a bridge. What does anyone suggest? Also how do the strings come out to be replaced? I am thinking of taking out a winder- forget what they are called and having an extra couple made. I was thinking that maybe I could have them 3D printed? What are your thoughts on this? Also, where would I get strings and which type and notes. I know there is some info posted, but I was wondering if there is any newer input. By the way, I am getting it from the original owner who basically kept it as a display piece! Is that cool or what? |
|
|
|
|
|
|
|
Posted By:
J Boy Shyne
|
Date: 8/23/2019 5:35:46 AM |
I had a Treholipee. I strung it re-entrant gCEA and used classical nylon guitar strings as follows:
E-1st string on classical guitar = A-1st string on Treholipee
B-2nd string on classical guitar = E-2nd string on Treholipee
G-3rd string on classical guitar = C-3rd string on Treholipee
E-1st string on classical guitar = g-4th string on Treholipee
If you wanna tune it with a low 4th string, then use a D (4th) string from a classical guitar set and tune the string up to G.
|
|
|
|